·
|
Z Clean Grade A1 Purging Compound 365 - 572° (F) - Temp Range General Purpose Resin, Standard Grade
|
Cleaning Olefin type resins. Injection molding only, use in purging barrel and screw all other molding machines
Great removal of pigments such as copper phthalocyanine blue, yellow organic pigments, etc. - Foaming
·
|
Z Clean Grade S28 Purging Compound 365 - 572° (F) - Temp Range Best Suited for Black Speck removal in clear
|
Resins, strong cleaning power grade for extruders and blow molding machine..
Cleaning agent designed to remove contaminates in the screw, barrel and die; specifically. Non-Foaming
·
|
Z Clean Grade S29 Purging Compound 365 - 716° (F) - Temp Range High Temperature Grade for Engineering & Super
|
Engineering Resins, heatproof resins and strong cleaning power. Application injection molding only
Great for purging barrel and screw. Temperature as high as 716˚ (F) allow molders to stretch the limits of their
Imagination and create new part designs of greater complexity. Foaming
·
|
Z Clean Grade S50 Purging Compound 365 - 572° (F) - Temp Range Moldable grade for PP Only
|
Great flexibility to wind on rollers for Film and Sheet extrusion, excellent for Hot Runners. Non-foaming
·
|
Z Clean Grade S60 Purging Compound 365 - 608° (F) - Temp Range Broadest Coverage for Resins, Multiple
|
Performance Grade. Styrene compounds, olefin compounds, transparent resins and engineering plastics - top
grade for use of many resin changes. No mineral fillers, which prevent bleeding after purging. Foaming
·
|
Z Clean Grade S80 Purging Compound 482 - 752° (F) - Temp Range High Temperature, High Performance Purging Agent.
|
New type of purging agent for high transparent plastics and super engineering plastics. Provides an excellent purging
performance in injection molding process when the change of material or colors are required. Also S80 can remove burnt or
carbonized resin from the screw and inside of the barrel due to the high osmotic force. Smoother switchover for transparent
resins. Ex. ETFE, PPSU, PEI, PC, PBT, PEEK, PFA, PPS, PES, PAI, LCP, m-PPE, PEN, PTFE, PSU, PA66
·
|
Z Clean Grade E1001 Purging Compound 365 - 572° (F) - Temp Range Excellent Grade for Extrusion & Safe for
|
Hot Runner Systems, excellent grade for cleaning extrusion of olefin type resins. Non foaming, non filler type
purge which allows the processor to purge equipment during injection molding, as well as having the flexibly to
wind on the roller for film or sheet extrusion. This grade has no filler which can linger in the die, cavity or runner
system after purging, causing removal problems.
·
|
Z Clean Grade E1700 Purging Compound 356 - 570° (F) - Temp Range Great for stack molds,
|
Eliminates the risk of short shots in the mold , very desirable to perform running color or material changes
efficiently. Well suited for low pressure applications such as structural foam and will not stick to the pattern due to
shrinkage. MFR 10.0 - 12.0 High flow, high cycle type purge for injection machines with hot runners systems.
·
|
Z Clean Grade E3001 Purging Compound 302- 572° (F) - Temp Range Best grade removal of burnt on
|
material for medium or low temperature molded resins. The best purging agent for PVC, which is apt to burn during
injection or extrusion operations. Ex., PUR, SAN TPE, TPR, TPU RPVC, LDPE. Non- Filler, Non-Foaming